HONDA RUBICON V1.0

Scania XS30 L32A-XS DLK

Typ:
Drehleiter

Baureihe:
L32A-XS

Land:
Deutschland

Kunde:
Landesfeuerwehrschule Sachsen

FAHRGESTELL:
Fahrgestelltyp:
Scania P280 B4x2LA

Radstand:
4.950 mm

Motorleistung:
206 kW/280 PS

TECHNISCHE DATEN:
Fahrzeugabmessungen
L x B x H: 10.300 x 2.500 x 3.290 mm

Zulässiges Gesamtgewicht:
18.000 kg

AUFBAU:

Hubrettung:
Abstützung Typ:
Waagerecht-Senkrecht-Abstützung

Abstützbreite:
4,80 m

Hauptbedienstand Typ:
COMFORT

Leitersatz Typ:
L32A-XS

Leitersatz Höhe:
32 m

Rettungskorb Typ:
HR-500-MF

Alle Rechte liegen bei (c). Hum3d Mod- Teileklau wird strafrechtlich verfolgt aufgrund von Urheber Recht.

RECHTLICHES:
ES IST VERBOTEN DIESE MOD VERÄNDERT ODER TEILE ERNEUT WIEDER HOCHZULADEN!
Scania XS30 L32A-XS DLK Drehleiter mit Korb 23/12 von Hum3d ist lizenziert unter einer Creative Commons Namensnennung – Nicht kommerziell – Keine Bearbeitungen 4.0 International Lizenz.
Über diese Lizenz hinausgehende Erlaubnisse können Sie unter

hum3d

Bonjour, c’est avec grand plaisir que je vous propose ma map suite à une fuite d’un de mes anciens testeur.
C’est une version qui date du 14 juin 2020 qui était encore un travaux que j’ai fini visuellement et corrigé afin que vous puissiez jouer dans de très bonnes conditions.

Les caractéristique principales:
– Terrain angle
– Boue
– Mod Seasons
– Global Compagny
– Stockage carburant
– Manure System
– Multi Fermes
– Multi patures
– Stabules curable
– Agrandissement de champs par suppression des barbelé in game
– Plusieurs points de vente

Surface des champs :
Field 1 (field01) : 1.841 ha
Field 2 (field02) : 5.344 ha
Field 3 (field03) : 0.759 ha
Field 4 (field04) : 1.521 ha
Field 5 (field05) : 0.324 ha
Field 6 (field06) : 7.187 ha
Field 7 (field07) : 0.686 ha
Field 8 (field08) : 6.244 ha
Field 9 (field09) : 0.971 ha
Field 10 (field10) : 2.210 ha
Field 11 (field11) : 1.155 ha
Field 12 (field12) : 1.520 ha
Field 13 (field13) : 3.016 ha
Field 14 (field14) : 0.461 ha
Field 15 (field15) : 42.367 ha
Field 16 (field16) : 0.744 ha
Field 17 (field17) : 0.962 ha
Field 18 (field18) : 0.385 ha
Field 19 (field19) : 0.762 ha
Field 20 (field20) : 0.623 ha
Field 21 (field21) : 3.445 ha
Field 22 (field22) : 6.887 ha
Field 23 (field23) : 0.152 ha
Field 24 (field24) : 0.858 ha
Field 25 (field25) : 1.633 ha
Field 26 (field26) : 0.488 ha
Field 27 (field27) : 1.065 ha
Field 28 (field28) : 4.202 ha
Field 29 (field29) : 9.049 ha
Field 30 (field30) : 1.360 ha
Field 31 (field31) : 3.496 ha
Field 32 (field32) : 0.839 ha
Field 33 (field33) : 0.299 ha
Field 34 (field34) : 0.947 ha
Field 35 (field35) : 1.025 ha
Field 36 (field36) : 0.654 ha
Field 37 (field37) : 0.410 ha
Field 38 (field38) : 0.751 ha
Field 39 (field39) : 4.374 ha
Field 40 (field40) : 0.884 ha

Contenu du pack:
– Map À Travers La France™
– Divers véhicules de départ

:: Map Créateur/Moddeur ::
LBDT Gaming

:: Scripteurs ::
Ifkonator, 112Tec pour Animated Characters Script, GtX|Andy, kevink98, DerElky,
yumi, Marhu, Realismus Modding, Joshua, NilBrain, igor29381, Timmiej93, ThundR, Grouminait,
ViperGTS96, LordBanana, Yipsi, Wopster

:: Construction 3D ::
Farmer Andy, BlackSheep Modding, MA7, JLP75, GoldFox, SCS Software, Giants Software, LBDT Gaming

:: Annonce et Promotion ::
LBDT Gaming

:: Remerciement spécial ! ::
Seb Modding pour son aide, Stephane Modding pour la réfection de certaines 3D, Ditch FraBel pour les PN FR.

Here for download is the Vredo VT7028-3. Capable of carrying 32,000 litres of slurry or digestate. You can unfold the ‘flexTank’ on x, after you can unfold the loading arm on O and use the mouse controls from there. Functions include crab steer including crab steer attacher, many custom parts, manure system ready, passenger seat ready and more. Enjoy!

Price: 495.000 €
Power: 687hp
Capacity: 32000L
Maximum speed: 53 km / h
Fuel tank capacity: 720l

– Configurations: GPS Recievers Horsch Joker Preperation
– Unfolding of ‘FlexTank’
– Unfolding of loading arm
– Crabsteering function
– ManureSystem ready
– Universal Passenger ready

TMDesign

6.03.00025 Mode 2/3 Improvements
fixes #6633 (Distance to next turn may not be defined for instance
in the last row)
tried to make the rendezvous more fault tolerant
use a higher fruit value limit in the hybrid parts as it is not a
problem getting temporarily closer to the fruit there, and it speeds
up the pathfinding quite a bit.
reduce off field penalty when combine on headland for faster
pathfinding
better driving time estimation to rendezvous point now
considering turns we have to make to get there
improved chopper handling in turns with headland at an angle

6.03.00024 Bridge and proximity sensor fixes
Goal node elevation fixed (#6665)
Proximity sensor directly on the back of the combine/chopper
allowing for the unloader to get closer.

When driving over non-level bridges, the controlled node isn’t vertical and
the goal node was positioned on the ground level which is way below the vehicle.

Due to this, the goal’s position in the controlled node’s reference wasn’t accurate
in this situation, seemed to be a lot closer when driving uphill, lot further when
driving downhill. Uphill goal being too close caused oscillations in PPC.

Moved the goal point on the level of the vehicle (controlled node), so the error
caused by the non-vertical controlled node is negligible.

Few proximity sensor and vehicle size fixes

Proximity sensor sits on the back of the combine now
fixed pathfinder vehicle data rectangles, clarified the

misconception that the direction node is always on the root node,
it is not, the direction node is the turning node, usually sits
between the non-steered wheels.

6.03.00022 Minor fixes
fix all hybrid A* pathfinder failing
fix reset fill level after making pocket

6.03.00021 Course generator and turn fixes
No extra headland circle (#6605)
Fixed the calculation of the headland/middle transition.
If the center mode is lands, there is still a small chance that

an almost full circle connecting track will be added if the starting
point is very close to the start/end of the first working row of the
lands pattern.

Partial fix for #6383
do not add straight section to turn end to align if there is no towed
implement
if turn on field enabled but there’s no space to turn (must reverse), use
the legacy wide turn (which is also buggy a bit).
if you don’t want your sprayers boom hit obstacles outside the field,
use a headland.

6.03.00020 Mode 2/3 improvements
Wait before starting the next row if the rendezvous point is close to the row end.
use A* to calculate distance to combine before the
rendezvous.
combine notifies unloader on missed rendezvous, unloader
re-plans route
try to approach combine waiting after backing out of the fruit
from the rear so we won’t cut in front of it.
don’t slow down around rendezvous when discharging already
don’t ask for a rendezvous when the combine is not willing to,

for example when unload is disabled on the first headland.
won’t initiate new rendezvous until the combine cancels the current one
move up rendezvous points close to row end
pipe in fruit map changed to have a 20 m buffer at each end of the
row to account for non-perpendicular headlands.
fixed offsets when calculating target to combine, sometimes it
used the side offset as front offset.
make sure to reset 95% full limit after making pocket
added safety margin to the calculation of the distance until full
All this to avoid the situation where the combine stops before reaching
the rendezvous point because it thinks it is full (although only 95%)
only considers unloaders actually waiting for assignment,
ignore the ones on unload course for example when a combine
is looking for an unloader
if an unloader is already assigned to a combine, only it is
waiting for the combine to become ready for unload (for example
due to fruit in pipe), assign the same combine to it. This
should probably be refactored, adding a new state for the unloader,
like WAITING_FOR_COMBINE_TO_BECOME_READY or so.

Courseplay.devTeam

BigManu2000 has extended the John Deere 7R here from the forum with some functions and configurations and is now making it available for download.

Version 1.1
LEDs built into the lamps (thanks Leo630)
Order of lights changed (standard assignment for keyboard)
License plate black added for black / silver lettering
the tractor is fully functional even without SIC.

Big thanks for that.
He added the following extensions:
Light: completely rebuilt – light cone – order and number of lights
Color choice: vehicle – Starfire – rims and bonnet grill
RUL: 3 different versions L / R / L + R
License plates: Front Small + Rear Large / Front Large + Rear Large by RedCat3D
Lettering: JD Orginal – Black Silver + Starfire
SIC: engine start – light / high beam / work light – RUL and hazard warning lights
Tires: Michelin / Mitas – standard / wide tires + weight and twin tires
Sound: Nastus 6R sound installed

Giants Software
LS ZockerStube
BigManu2000
modelleicher: Simple IC
Ifko(nator): EAS Script
Ifko(nator): AddConfig Script
RedCat3D: Kennzeichen
Sound: Nastus