FS22 trailers mods

Tippers/trailers for transport the harvest.

CMR201 CMR203 are 6,5 m length, 3 axles
– Price from: 82,500 $
– Capacity: 24.000 – 36.000 liters

CMR301 CMR309 are 7,0 m length, 3 axles
– Price from: 83,500 $
– Capacity: 26.000 – 39.000 liters

CMR304 CMR310 are 8,0 m length, 4 axles
– Price from: 94,000 $
– Capacity: 29.000 – 44.000 liters

CMR307 CMR315 are 9,0 m length, 4 axles
– Price from: 95,000 $
– Capacity: 33.000 – 50.000 liters

The models are: complete configurations and the colors are customizable.

DD ModPassion

Lizard’s range of dump trailers are some of the best available in today’s market.
Dump trailers provide a fast and efficient solution for transportation of large quantities of site material, gravel, soil etc.
Lizard also offer different door variations on their dump trailers that can assist with the transportation of difficult loads such as trees and stumps.
A variety of tyre types and sizes from road pattern to wide flotation tyres for fieldwork are also available.

Price: 12,875 $
Capacity: 10,500 litres

4D Modding – Eire Agri Modding

Lizard Engineering manufacture the strongest Vacuum Tankers on the market.
We currently manufacture vacuum tankers from 800 gallons (3,600 litres) to 4500 gallons (20,250 litres).
All of our tanks use a unique low profile spreading system which will achieve a spreading pattern up to 12 metres wide.
The downward splashplate not only increases controllability, but also decreases air pollution and unpleasant smells and
helps to ensure all slurry nutrients are directed onto the soil.

The 3500 gallon tanker comes with two axles, rear steer with multiple choices of wheels and optional colors for the customer

Price: 28285 $

4D Modding – Eire Agri Modding

Price: 28.000 $
Category: Bale Loaders
Slots: 11

Features:
– Autoload for round (125-180cm, 22-34 bales) or square (180-240cm, 16-42 bales) bales.
– Autoload for pallets (3x 20,000 – 3x 30,000 Liter; all palettes that are set up by default)
– Ppallets autoload Platinum and Premium Expansion ready
– Different working modes for bale and pallet autoload
– Choice of colours for rims, semitrailer and flatbed
– Fliegl logo (rear) selectable in white, red and black
– Rear trailer hitch
– Number plate
– Sounds when attaching and deattaching the trailer
– Tyres (Continental, Trelleborg, Michelin, BKT, Vredestein)
– Supports Hesston Bales of the Hesston Balers mod
– Supports “Selectable Bale Capacity Pack” mod
– Supports “Universal Autoload” mod in autoload configuration “standard”(PC/MAC only)

Function:
Bales: First bring the trailer into the working position, the bales can now be collected. After collecting, return the trailer to the transport position.

To unload, select the unloading place via the unloading mode and unload the bales. After unloading, stop the unloading process.

If the bales are unloaded onto the platform, they can then also be moved manually e.g. by a front loader.

With the working mode, the autoload can be set to either collect the bales from the field or to put them onto the platform before the autoload collects them.

Pallets: There are several loading areas to load different pallets. Each loading area has its own marked loading zone. This marking can be switched on and off.

The loading zone trigger can be adjusted in height to detect the different unloading triggers of the pallets.

Loading starts automatically when a pallet is detected in the loading zone or loading can be started manually for each pallet individually.

With the work mode, the autoload can be set whether the pallets are detected next to the trailer or have to be brought over the platform.

Notes:
The bales can be unloaded to the side and to the rear and rotated in all directions. If in working or transport mode the bales are shifted on the platform, changing the mode is sufficient to correct the position.

Autoload only works if this is configured in the garage. For the “Universal Autoload” mod, please select “Standard” as the autoload configuration.

If the trailer is configured with bales in autoload mode, these are then “locked” for further processing. Simply unload the bales onto the trailer, configure again and the bales can be used again. The same also works if the bales get “stuck” after loading a savegame.

Changelog:
1.0.3.0:
– Extended support for more bale sizes from the supported mods
– Added Sounds when attaching and deattaching
– Added pallet autoload
– Removed dynamicMountAttacher
– Fixed HUD icons

1.0.2.0:
– Added variant with smaller load area
– Added Steering axle
– Revised tension belt position
– Revised bale position and capacities
– Other vehicles and equipment now spawn closer to the trailer at the vehicle dealer
– Added autoload working mode (size of bale trigger)
– Number plate position is now dependent on the trailer hitch
– Bale capacity selection removed (is now automatically set) (*)
– Added support for “Selectable Bale Capacity Pack” mod
– Added support for “Universal Autoload” mod (PC/MAC only)

Notes:
(*) Depending on the selected configuration, the trailer needs to be reconfigured once.

1.0.1.0:
– Fixed display of control icons in info help window
– Fixed warning regarding missing setting in the configuration file fixed
– Fixed collision in front
– Fixed issue where AI traffic did not pass the trailer
– Added support for 120cm x 130cm Hesston bales

TopAce888

This trailer is designed to transport pallets and bales with the 1986 pickup and 2017 pickup.

Fan
– Price: $4,250

Configurations
– main color
– rim color
– rim selection
– roll bar

Have fun!

Changelog 1.1.0.0:
– Added collision of side panels
– Added license plate
– No underwire is now standard
– New choice of rear bumper between original and color
– Completely new axle and drawbar

MTL Modding Team

L40
Price: 10.000 $
Max. working speed: 20 kph
Required power: 40 hp
Capacity: 4.000 liters
Working width: 6 meters

L60
Price: 12.500 $
Max. working speed: 20 kph
Required power: 70 hp
Capacity: 6.000 liters
Working width: 7 meters

L80
Price: 15.000 $
Max. working speed: 20 kph
Required power: 80 hp
Capacity: 8.000 liters
Working width: 7 meters

L100
Price: 25.000 $
Max. working speed: 20 kph
Required power: 100 hp
Capacity: 10.000 liters
Working width: 7 meters

L140
Price: 30.000 $
Max. working speed: 20 kph
Required power: 120 hp
Capacity: 14.000 liters
Working width: 10 meters

L160
Price: 32.000 $
Max. working speed: 20 kph
Required power: 140 hp
Capacity: 16.000 liters
Working width: 10 meters

L160G
Price: 32.000 $
Max. working speed: 20 kph
Required power: 140 hp
Capacity: 16.000 liters
Working width: 10 meters

L200
Price: 40.000 $
Max. working speed: 20 kph
Required power: 150 hp
Capacity: 20.000 liters
Working width: 12 meters

DD ModPassion

-Price: 3400 $
-Capacity: 3900-5250 Liters
-Color, tires and sides configuration

Slyclif, Voksel, Hydraulik

LAIR tippers are designed for the most extreme terrains. The challenge is to create a skip to reconcile innovation, safety and comfort of use.

Air SP190:
Characteristic:

– Price from: 25,000$
– Capacity configurations: 15150 L – 18500 L – 24000 L
– Tire configuration: Michelin / Trelleborg / BKT / Vredestein

Air SP290:
Characteristic:
– Price from: 42,500$
– Reversing lights
– Forced steering axles
– Body length: 7.5m
– Body height: 1.2m
– Body width: 2.3m
– Capacity configurations: 21000 L – 27500 L – 38500 L
– Tire configuration: Michelin / Trelleborg / BKT / Vredestein
– Mudguard configuration

Changelog 1.1:
– Added SP290 model

AgriDesignModding