FERRARI SF90 STRADALE 2020 V1.0

6.03.00040 Grimme DLC fix
fix call stack with harvesters with no pipe, fixes #6824
stop at end option back for mode 5, closes #6808
Köckerling Vectors added to the vehicle configuration, so CP
handles them as towed implements with wheels, fixes #6823

6.03.00038 Bale unload fixes #5837 (#6798)
Check bale height when unloading bales to find the spot to unload.

6.03.00034 Convoy for lands pattern fixed
Fixes a minor issue when using convoy (multitool) with lands
or other patterns with wide turns where the vehicle in the front
let the one behind it pass after a turn.

6.03.00033 Plow and weather fixes
combines lower header after the rain stops, fixes #5039
Reintroduced manual working width configuration.
Can now be configured in XML, fixed SPSL9 working width,
fixes #6738
Added back that we need a mouse cursor, but now we can use any cursor and not only CP.
fixes #6735

6.03.00032 Convoy and attach/detach fixes
Better progress calculation for convoy mode (fixes #6011)
Reset mode when detaching/attaching implements (fixes #6726). This caused
some implements not reversing correctly.

6.03.00029
Fixes #6724, when checking nearby vehicles, only check
ones which are enterable.

Fixes #4955 #6646 AD courses have no speed set,
handle that in the course editor.

Also increased recursion limit for headland calculation,
this should fix issues when starting the inner vehicle

in a multitool configuration where the course begins
close to a corner.

6.03.00028 Fixes #6713
Also includes
potato harvester pull back course fix for #5012
course generator screen update for #5102
Fixes #5012, #5102

6.03.00025 Mode 2/3 Improvements
fixes #6633 (Distance to next turn may not be defined for instance
in the last row)
tried to make the rendezvous more fault tolerant
use a higher fruit value limit in the hybrid parts as it is not a
problem getting temporarily closer to the fruit there, and it speeds
up the pathfinding quite a bit.
reduce off field penalty when combine on headland for faster
pathfinding
better driving time estimation to rendezvous point now
considering turns we have to make to get there
improved chopper handling in turns with headland at an angle

6.03.00024 Bridge and proximity sensor fixes
Goal node elevation fixed (#6665)
Proximity sensor directly on the back of the combine/chopper
allowing for the unloader to get closer.

When driving over non-level bridges, the controlled node isn’t vertical and
the goal node was positioned on the ground level which is way below the vehicle.

Due to this, the goal’s position in the controlled node’s reference wasn’t accurate
in this situation, seemed to be a lot closer when driving uphill, lot further when
driving downhill. Uphill goal being too close caused oscillations in PPC.

Moved the goal point on the level of the vehicle (controlled node), so the error
caused by the non-vertical controlled node is negligible.

Few proximity sensor and vehicle size fixes

Proximity sensor sits on the back of the combine now
fixed pathfinder vehicle data rectangles, clarified the

misconception that the direction node is always on the root node,

it is not, the direction node is the turning node, usually sits
between the non-steered wheels.

6.03.00022 Minor fixes
fix all hybrid A* pathfinder failing
fix reset fill level after making pocket

6.03.00021 Course generator and turn fixes
No extra headland circle (#6605)
Fixed the calculation of the headland/middle transition.
If the center mode is lands, there is still a small chance that

an almost full circle connecting track will be added if the starting
point is very close to the start/end of the first working row of the
lands pattern.

Partial fix for #6383
do not add straight section to turn end to align if there is no towed
implement
if turn on field enabled but there’s no space to turn (must reverse), use
the legacy wide turn (which is also buggy a bit).
if you don’t want your sprayers boom hit obstacles outside the field,
use a headland.

6.03.00020 Mode 2/3 improvements
Wait before starting the next row if the rendezvous point is close to the row end.
use A* to calculate distance to combine before the
rendezvous.
combine notifies unloader on missed rendezvous, unloader
re-plans route
try to approach combine waiting after backing out of the fruit
from the rear so we won’t cut in front of it.
don’t slow down around rendezvous when discharging already
don’t ask for a rendezvous when the combine is not willing to,

for example when unload is disabled on the first headland.
won’t initiate new rendezvous until the combine cancels the current one
move up rendezvous points close to row end
pipe in fruit map changed to have a 20 m buffer at each end of the
row to account for non-perpendicular headlands.
fixed offsets when calculating target to combine, sometimes it
used the side offset as front offset.
make sure to reset 95% full limit after making pocket
added safety margin to the calculation of the distance until full
All this to avoid the situation where the combine stops before reaching
the rendezvous point because it thinks it is full (although only 95%)
only considers unloaders actually waiting for assignment,
ignore the ones on unload course for example when a combine
is looking for an unloader
if an unloader is already assigned to a combine, only it is
waiting for the combine to become ready for unload (for example
due to fruit in pipe), assign the same combine to it. This
should probably be refactored, adding a new state for the unloader,
like WAITING_FOR_COMBINE_TO_BECOME_READY or so.

pvaiko

Hello,

I hereby offer you my conversion of the 700/800 Vario from Cayman718.

Version 4.2
-Com 2 now based on the real model, possibility of selecting old and new front hydraulics
-Great Hauer console installed for the XB150

Functions:
-Motor configurations:
-Fendt 700: 711,712,714,716 Favorit, 712,714, 716 & 718 Vario
-Fendt 800 Com 2: 815, 817, 818 Vario (not 100% realistic, possibly in future versions.)
-Fendt 800: 818, 820 Vario
-all standard LS19 functions
-animated and illuminated interior
-GPS configurable (Guidance Steering Mod required)
-Doors and windows can be opened with SimpleIC

Rotating beacon and warning signs can be configured and can be folded from the outside with SimpleIC
-Front fender removable from the outside with SimpleIC
-with Ctrl + F you can switch between normal light and top headlights
-Motor and headlights can be switched on / off with SimpleIC
-Operation of the hydraulics and PTO from inside and outside possible with SimpleIC (latest SimpleIC version necessary !!!)
-Tire pressure script from Wopster is built in, but it works with every tire configuration because I don’t know how to do it on certain configurations.
-Front loader consoles: Stoll, Fendt 3S (The Fl is WIP from Cayman), Fendt Cargo (incl. Front loader from DtpMario), Aloe, Puma
-Universal Passenger installed by Jannik

Mods required for the full scope:
Universal Passenger – https://www.farming-simulator.com/mod.php?lang=de&country=at&mod_id=139095
SimpleIC – https://github.com/modelleicher/FS19_simpleIC
In order for the latest version to work, there must be no tow bars on the score!
Aloe front loader – https://www.farming-simulator.com/mod.php?lang=de&country=be&mod_id=129390
Hauer front loader – https://www.farming-simulator.com/mod.php?lang=de&country=be&mod_id=180014
Guidance Steering – https://www.farming-simulator.com/mod.php?lang=en&country=us&mod_id=140328&title=fs2019
Claas-DLC for TM1060 tires – https://www.farming-simulator.com/dlc-detail.php?lang=de&country=at&dlc_id=fs19platinum77

XX_Malle_XX – Ls17 model
Cayman718 – conversion LS19 as well as Stoll, Fendt3S console
Wopster – TirePressure Script
DtpMario – Fendt Cargo console plus front loader
GtX – Universal Passenger Script
Puma – Aloe console
constii.ls – Hauer console
WhyLineZ – conversion
Janik help with the renovation
siLance – sound
Gamer8250 – tire pressure regulation system

This tractor must NOT be uploaded to other sites because it is a conversion and the original model comes from Cayman and XX_Malle_XX.
The front loader also only has one approval for me, upon request to DtpMario.

Hello dear Com,

Here I offer you the latest project from “BlueLight-Modding” for download

Info about the mod:
Blue light / cervical spine
Surrounding lighting, as well as an animated light mast via Simple IC
Pneumatic horn
UV mapped (skins can be created!)
Animated “L-Tronic” control panel in the interior!

The mod was tested to 90% on the standard map, there the log was error-free!
I cannot guarantee an error-free log if there are other mods in the folder.

In order to be able to use all functions of the mod, “SimpleIC” is required
As I said, the skin can be changed & uploaded as long as “BlueLight-Modding” is mentioned in the credits!
The current version is only 0.9! If errors are found, I would be happy to receive the relevant information!
have fun with the mod! MfG: BlueLight Modding.

Modell: BlueLight-Modding
Textur: BlueLight-Modding
Idee / Konzept: BlueLight-Modding / ogduck
Tester: B3nny / ogduck
Sonstige: SoSi-Modding

Here is the AGRI BZH 19 map finally available for you!

On the map there is:
-season compatible
-3 farms (cows; pigs; cereals)
-1 coop
-1 livestock trader
-farmland
-abbatoir
-spline car and NPC
-No buildings removed as a new farmer!
-From the forester
-Basic modified textures
-2 villages
-plain and bocage
-Multi terrain angle
-Server compatible (log clean)
-Precision agriculture

This version has been tested but some bugs may persist if this is the case the comments under this DL setting will be used as support
Thank you to all those who will download it good games to you!

Jean Villiers
Fendtdu22
AgriBzhTeam

Der Mercedes AMG 2019 hat folgende Ausstattung:
Farbwahl + Schwatzinger Kennzeichen
Polizeikin + Schwatzinger Kennzeichen
Saifety Carskin + Saifety Car Kennzeichen

Modell: Real Life Team (jerri181), [TB]Luki
Textur: ELSM Modding, Real Life Team (Gaming_isDa)
Script: GtX Andy, Ifko [nator]
Idee / Konzept: Gaming_isDa