Annaburger HTS 22.79 MultiLand Plus v 1.3.1.2

The Bauer V 30 is a liquid manure tank that is well suited for small to medium-sized farms. With a working width of 7 m, it is perfect for companies that work in the mountains.
The lightweight construction of the Bauer V 30 makes it particularly suitable for off-road use. The wide tires give a good grip on the slope.

– Price from: 5.900 $
– Working width: 7 m
– Capacity: 3.100 l
– Required power: 35 hp
– Max. Working speed: 16 km/h

– FS22 standards
– Configurable decorative hoses
– Configurable tires (Trelleborg, BKT)
– Connectable hydraulic hoses

Changelog 1.1.0.0:
– Added Manure System
– Little fixes

AgrarDesignAustria

The Kirchner T 6000 is a liquid manure tank that is well suited for small to medium-sized businesses. With a working width of 9m (baffle plate) and 12 m (high pressure) it is perfect for companies that operate in the mountains.

– Price from: 11.000 $
– Working width: 9 m and 12 m
– Capacity: 6.000 l
– Required power: 45 hp
– Max. Working speed: 18 km/h

– FS22 standards
– Configurable distributor type
– Configurable decorative hoses
– Configurable slurry couplings
– Configurable tires (Trelleborg, BKT)
– Connectable hydraulic hoses

Changelog 1.1.0.0:
– Added Manure System
– Little fixes

AgrarDesignAustria

In tough everyday transport, time is what counts most. This is why the STZ-VP 2 and 3 low bed trailer can be loaded quickly and easily from the front.
With increasing weight and volume of the cargo, it is also crucial that the vehicles themselves are as light as possible and at the same time can carry high payloads.
The STZ-VP 2 and 3 is the true champion here, doing the heavy lifting for you.

The steering angle has been adjusted so that it optimally follows the towing vehicle.
The neck can be tilted and the chassis can be lifted for significantly more ground clearance.
The low bed has been significantly lengthened so that even the largest vehicles now have space.
Low bed can be widened.
Warning signs can be configured and extended.
Additional drive-over ramps.

Prices from:
– STZ-VP2 : 40,000$
– STZ-VP3 : 45,000$

Note: In the shop, the Goldhofer can start to move at the options. This is due to the fact that the Goldhofer consists of 2 individual components and is reloaded each time.

Changelog: 2.0.0.0
– Various modifications to the STZ-VP3.
– Added STZ-VP2 low loader.
– Added drive over ramps.
– Description changed.

Changelog: 2.0.0.1
– Fixed a bug in the attacher
– Colors Revised and Volvo colors added
– Kingpin replaced and sliding coupling added

HR Forst und Fahrzeugbau

Bullbar for the Volvo F16 from the Platinum Forest DLC.

For all other trucks, the Lizard bullbar is included.
This can be positioned via Mouse control

They come in 4 designs

Note: After purchase, drive up and hitch up according to the explanation on the box.

Headlights are switched on with the following button/button combination:
PC: X
PS4/5: L1 + X
Xbox: LB + A

Can be found under Devices/Miscellaneous

Price from: 5,000 $

Changelog: 1.0.0.1
– Fixed a bug in the coupling animation of the Lizard Universal Bullbar. A collision had not moved.

HR Forst und Fahrzeugbau

Dashboard Live (short: DBL) allows you to display all kinds of information in your board computers and/or dashboards in all kinds of tractors, no matter what brand.

A zoom function is included for better viewing of displays:
– Left shift key – space bar: Short zoom
– Both shift keys – space bar: Permanent zoom on/off

If supported in the vehicle, the right Alt key and left/right/up/down arrow can be used to scroll through displays.

In MultiPlayer game, DBL synchronises engine temperature, fuel and air consumption from the server to the clients.

What can be displayed?

Basic game:
– Status of the front and rear linkage
– Status of attached implements and trailers
– Fill levels
– Compass heading
– PTOs
– Display of the currently active implement
– Folding state
– Tipping State
– TipSide
– Heading (N/E/S/W, N/NE/E/SE/S/SW/W/NE or degree)
– Field Number
– FillLevel Weight
– Realtime Clock

VehicleControlAddon:
– Status of the differential locks
– Status of the all-wheel drive
– Hold speed
– GPS status
– Actual wheel slip (if FS22_VehicleControlAddon or FS22_reaGUI is present)

Enhanced Vehicle:
– Status of the differential locks
– Status of the all-wheel drive

Guidance Steering
– GPS status
– Working width
– GPS Track

Headland Management:
– Status
– Field/Headland mode

ProSeed:
– All displays of the ProSeed HUD

Combine:
– Filling state
– Chopper / Swath state
– Worked hectars
– Cutting height
– Pipe folding state
– Pipe overloading state

CombineXP:
– Tons per Hour
– Engine Load
– Yield
– High moisture warning

Baler:
– Bale size
– Bale counter (if Vermeer-DLC, Goeweill DLC or Ifko’s BaleCounter mod is present)
– Wrapped bale counter (if Ifko’s BaleCounter is present)

Frontloader:
– Tool position

All supported mods are optional.

Changelog V1.1.0.0:
– added new base game functions
– combine support
– baler support
– front loader support
– wheel slip
– support for FS22_combineXP
– support for FS22_lockSteeringAxle
– several fixes
– complete command overview added

Changelog V1.2.0.0:
– added MiniMap integration
– added page groups to be able to scroll pages on multiple terminals

Changelog V1.3.0.0:
– Support for PrecisionFarming
– Support for CVTaddon
– Support for RDA (tyre pressure regulation system)
– Compatibility with customPDAs of the realGPS mod
– Translation for front loader added
– Dark Mode added
– Fix for cutHeight
– displayType=”AUDIO” added

Important: Vehicles must be prepared for DashboardLive in advance to use the features and displays.
Installation guide and documentation are included, video tutorials are also available.

Glowins Modschmiede