CAR CREEPER V1.0.0.0

Quick convert of the swan boat I made for fs19 to fs22, so far I don’t have a map for boat, so I always have the “don’t drive too deep” warning, but they’re might be map or mod to disregard that issue released by the modding comunity later on, anyway, worse case just raise it a bit and drive around haha ! Already pending on mod-network !

SebCroteau

The John Deere 455 box drill is a 3 section box drill with a working width of 30′, that has been in production with minor changes since the 90s. The 455 is capable of no till seeding in extremely specific situations, because of the fact that the game only allows no till to be either on or off, rather than work only under specific conditions, I have decided to disable the no till capability. The 455 is commonly used on the West coast for seeding hay crops, as well as cereal grains on smaller operations, in the Midwest they are commonly dedicated to seeding alfalfa and other hay crops, although they are sometimes used for cover crops and cereal grains.

FS17: Lindbejb (Lindbejb Modding)
FS19:
Conversion: Diniz Farms
Hitch/Tank: SB_Farms, Hunter Bigham(Expendables Modding)
FS22: Matthew Matt, Diniz Farms

Hello everyone!
This mod consists of 9 wind turbines of the EP5 platform with different hub heights. The following are the features of the plants:
-All turbines adjust to the wind and change their speed depending on the wind speed.
-Anemometers are animated and adjust to wind speed.
-Obstacle marking adapts to the light conditions in the different seasons.
-The income per hour and the daily maintenance costs are one thousandth of the purchase price.

The following systems are included:
E136 EP5: 109m, 120m and 132m hub height (Price each: €500,000)
E147 EP5: 126m, 143m and 155m hub height (Price each: €600,000)
E160 EP5: 120m, 140m and 166m hub height (Price each: €700,000)
You can find more pictures under the following post, as only a maximum of 5 file attachments are allowed here: Template (link will follow later)

PLEASE NOTE:
These are not detailed illustrations of the real models. Only the hub height, the rotor diameter and the rough appearance are based on the real images!
This mod may be posted on other websites as long as the download leads to the LS-Modcompany download link!

FSven

Hello everyone!
This mod consists of 6 wind turbines of the EnVentus platform with different hub heights. The following are the features of the plants:
-All turbines adjust to the wind and change their speed depending on the wind speed.
-Anemometers are animated and adjust to wind speed.
-Obstacle marking adapts to the light conditions in the different seasons.
-The income per hour and the daily maintenance costs are one thousandth of the purchase price.

The following systems are included:
V150 EnVentus: 105m, 148m and 166m hub height (price each: €675,000)
V162 EnVentus: 125m, 149m and 169m hub height (Price each: €725,000)
You can find more pictures under the following post, as only a maximum of 5 file attachments are allowed here: Template (link will follow later)

PLEASE NOTE:
These are not detailed illustrations of the real models. Only the hub height, the rotor diameter and the rough appearance are based on the real images!
This mod may be posted on other websites as long as the download leads to the LS Modcompany download link!

FSven

A Fendt top link for installation including installation instructions.

Version 1.1.0.0
Added the heels for the shadow throw now the top link also has shadow

The Fendt top link is a work by Zinoz LP who built it for me. A big thank you goes out to him.
Approval for publication is available
No approval is required for the top link, anyone can build it and also publish it with this top link
Please take these instructions below, otherwise it won’t work because it’s called FS22 now

Installation instructions Fendt upper link for the 22er:
1. Extract FS22_Fendt_Upperlink_prefab.zip to FS22_Fendt_Upperlink_prefab
2. Push the FS22_Fendt_Upperlink_prefab folder into the mod where the upper link is to be installed
3. Then in the line from the vehicle XML search for topArm and change the filename to:
filename=”FS22_Fendt_Upperlink_prefab/FendtUpperlink.i3d”
4. The new top link should now be there in the FS22

Have fun with the new top link from Fendt

Zinoz LP, PrivatPrivat