KRONE TX 560 D V1.0.0.0

Curtainsiders from Fliegl reliably and economically travel over many millions of kilometers on Europe’s roads. With an unladen weight of approximately 6 tonnes they achieve a payload advantage of about 800 kg over comparable vehicles from other manufacturers.

FEATURES:
– Options for a base Curtainsider design without branding and a standard color design without any additional graphics
– Manufacturer specific color options included for Fliegl
– Multiple wheel options including Continental HT3, HS3, and HCS

Price: $30,000

(Autoloading is supported through the use of the “Universal Autoload” mod by loki_79; There is no stand-alone autoloading option included with this mod)

JKAgCo

Technical specifications:
– Price: 14300 $
– Weight: 730 kg
– Needed power: 60 hp
– Working speed: 12 kph
– Working width: 4 m

Features:
– Complete ground adaptation
– Animated tines

Configurations:
– Standart or sowing machine with 3-point attachment
– Standart or sowing machine with fast coupler triangle and 3-point attachment
– Levelling plate
– Warning plates
– Position of upper link ball
– Position of lower link balls
– Base color (black or red)

AgrarDesignAustria

DOMINATOR 105:
– Engine power: 180HP
– Fuel tank: 500 l
– Grain tank: 6500 l
– Maximum speed: 22 kph
– Price: $36,500

C510:
– Working width: 5.1m
– Working speed: 10 kph
– Price: $6,500

C510 TRAILER:
– Price: $750

Deus_Volt

Speed: 120kph / 75 mph
Power: 200hp
Price: 45000

Changelog 1.1.0.0:
– Added passenger script support (Kubota Pack)
– Added indicators for light and turn light
– New descVersion (72)

– Base color configuration
– Configurable bumper and roof bar with work lights or beacon lights
– Openable doors
– Option to lift the frame
– Configurable interior decoration

Vector Man

Changelog 1.0.0.1:
Fixed swapped turn signals.
Corrected rear working lights.
Lighting reduced due to new Giants guidelines.
Adjusted shop options description for front gate.
Rear lights changed.

The Fliegl Timber Runner Pack includes:
2A – 2 axle
3AK – 3 axle short
3A – 3 axle
3AL – 3 axle long
4A – 4 axle
3SH – 3 axle gooseneck
3SHS – 3 axle gooseneck saddle

Except for the 3AK, all have an underride guard with a choice of colour.
Various shop configurations possible.

The center of gravity of the trailer can be moved down for stabilization.
See screenshot 3.
The weight setting can be read on the left side of every 1st stanchion.
In the loaded state, the trailer tilts to the side as standard. (Level 0 empty run)
With a half-full load you would e.g. Select level 4 to prevent tipping.
Level 8 is ideal for maximum loading.
If the trailer moves while standing, the weight point should be pushed further up.

Prices:
2A from: 30,000 $
3AK from: 32,000 $
3A from: 35,000 $
3AL from: 40,000 $
4A from: 48,000 $
3SH from: 50,000 $
3SHS from: 55,000 $

HR Forst und Fahrzeugbau