PLUCHE PILLOW FOR ALL TRUCKS V1.0

Changelog v.1.6
New Parts:
Air Filter Paint
Cabin Side Stripe Paint
Chrome Roofbars
Chrome Bottombars
Chrome Sidebars
Chrome Frontbars
Bullbar Chrome
Bullbar Paint
Bullbar Satin Black
Bottombar FH4 Lip
Renault Hub Cover
Roof Airhorn Paint
Wind Deflector Mirror Paint
Lightbox Cutout Sunvisor
New Custom Rearlights
Rochatte Transports (FR) Roofbar
Rochatte Transports (FR) Frontbar
Rochatte Transports (FR) Sunvisor

Skins:
Rochatte Transports (FR)
Custom Style Skin

Fixes:
AO Rearfender Correction 6×24 6×2
Double Rearlight Fenders SCS License Plate
Lowered Chassis Standalone
Lowered Chassis Shadow Adjustments
Added Missing Texture on Airco Interior Model
Lightbox Removed Glass
Custom Sunvisors Slot Adjustments

Def Files:
Added Conflict Strings

New parts added:
FH4 Lip extended Paint/Black/Plastic
Mudflap as accessory
8 front grill slots (Bullbar Slot)
Closed stoneguard Paint/Black Interior/Exterior (Windowframe Slot)
Slots whit roofmarkers
4 airco’s Paint/Stock
Interior panel for airco’s (ToyBig Slot)
Custom Skin2 (Thanks to Koenigszapfen who made it)
Spoiler slots for sleeper cab
Double rearmudflaps for 4×2

Gloover, SCS

Steyr Profi CVT with IfkoS Terminal, many SimpleIC functions and many configurations in the shop

Version 1.3.1
Here is the little bug fix of the Steyr. I’ve tried to fix most of the bugs you told me.

Fixed:
– Daytime running lights are now on
– Tusk console exchanged for aloe console due to incompatibility
– rear tires no longer hang in the fender
– The lifting speed of the front hydraulics increased

Moin dear LS community,
I hereby offer you version 1.3 of my Steyr Profi CVT.
Shifty and I built a fully animated monitor together with the help of the IfkoS script.
However, many other functions have also been added.

Functions, animations etc:
SimpleIC:
– doors and windows (with sounds)
– many other things in the interior
– engine start
– Hydraulic and PTO control (animated buttons and levers)
– Turn signal control
– various things outside

Shop:
– many tire configurations and cosmetic configurations etc.

Other novelties:
– Universal Passenger
– Seatcam
– Added suspension sound (Credits: Lance)
– cruiseControlExtension installed (thanks for the approval Ifko [nator])
– animatedIndoorParts and JohnDeerePackUtil script installed (thanks for the approval Ifko [nator])
– Four-page screen + A column (main page, trailer page, ProSeed page and GPS page) created together with Shifty

Physical and technical changes:
– real MotorSounds and new Sound XML used (Credits: Marcel313, [MW] PeterAH)
– technical adjustments (Credits Kramer14)

A special thank you goes to Ifko [nator] and Shifty for the help and
Support out.
Now we wish you a lot of fun with the Steyr!
Van3x & Shifty

Mods required for the full scope:
Universal passenger
SimpleIC – GitHub – modelleicher / FS19_simpleIC: New Interactive Control Script for FS19
Guidance Steering
ProSeed: – ProSeed | ModHub | Agriculture simulator
Bale counter – bale counter
Steering axle lock – lock steering axle – lsfarming-mods.com
This mod may NOT be uploaded with any other link. In addition, there are no releases to use parts of this mod, let alone the whole mod, and to upload them to other sites and call them your own.

Van3x, Shifty, LSsilance, Ifko[nator], Kramer14
Alle weiteren in der ModDesc Changelog

Baas 72n33 Klinklader with color choice.
So far suitable for Güldner, Eicher, IHC, Deutz, Hanomag, Lanz and Fendt.
Equipment is included in the mod. A new addition is a self-made ball fork.

Oldenfarm, Bremi456, Polofreak211, Puma[FBM], PeterAH, Dani86, Kreters-Island, deutzfreakwsm, madabub
Pics by Eicherisgeil

6.03.00041 Many minor fixes
Mode 1 with overloader swerve fix #6814 #6801
See if the other vehicle as an overloader, potentially waiting
for us (is near the overload point). We should not swerve as we
need to drive under the pipe of the overloader wagon.

Stop at end setting fix for #6845
Never set or reset stop at end automatically.

Also fixed a minor pathfinder bug when generating an alignment
course starting in reverse, made sure the first waypoint really
is always in reverse.

Two-side headland fix for #6847

Editor delete to start fix

Fixed some MP debug output and Editor delete all WP to start
for SP and MP. #6297

Full credits to @Satissis who helped us out once more 🙂

6.03.00040 Grimme DLC fix
fix call stack with harvesters with no pipe, fixes #6824
stop at end option back for mode 5, closes #6808
Köckerling Vectors added to the vehicle configuration, so CP
handles them as towed implements with wheels, fixes #6823

6.03.00038 Bale unload fixes #5837 (#6798)
Check bale height when unloading bales to find the spot to unload.

6.03.00034 Convoy for lands pattern fixed
Fixes a minor issue when using convoy (multitool) with lands
or other patterns with wide turns where the vehicle in the front
let the one behind it pass after a turn.

6.03.00033 Plow and weather fixes
combines lower header after the rain stops, fixes #5039
Reintroduced manual working width configuration.
Can now be configured in XML, fixed SPSL9 working width,
fixes #6738
Added back that we need a mouse cursor, but now we can use any cursor and not only CP.
fixes #6735

6.03.00032 Convoy and attach/detach fixes
Better progress calculation for convoy mode (fixes #6011)
Reset mode when detaching/attaching implements (fixes #6726). This caused
some implements not reversing correctly.

6.03.00029
Fixes #6724, when checking nearby vehicles, only check
ones which are enterable.

Fixes #4955 #6646 AD courses have no speed set,
handle that in the course editor.

Also increased recursion limit for headland calculation,
this should fix issues when starting the inner vehicle

in a multitool configuration where the course begins
close to a corner.

6.03.00028 Fixes #6713
Also includes
potato harvester pull back course fix for #5012
course generator screen update for #5102
Fixes #5012, #5102

6.03.00025 Mode 2/3 Improvements
fixes #6633 (Distance to next turn may not be defined for instance
in the last row)
tried to make the rendezvous more fault tolerant
use a higher fruit value limit in the hybrid parts as it is not a
problem getting temporarily closer to the fruit there, and it speeds
up the pathfinding quite a bit.
reduce off field penalty when combine on headland for faster
pathfinding
better driving time estimation to rendezvous point now
considering turns we have to make to get there
improved chopper handling in turns with headland at an angle

6.03.00024 Bridge and proximity sensor fixes
Goal node elevation fixed (#6665)
Proximity sensor directly on the back of the combine/chopper
allowing for the unloader to get closer.

When driving over non-level bridges, the controlled node isn’t vertical and
the goal node was positioned on the ground level which is way below the vehicle.

Due to this, the goal’s position in the controlled node’s reference wasn’t accurate
in this situation, seemed to be a lot closer when driving uphill, lot further when
driving downhill. Uphill goal being too close caused oscillations in PPC.

Moved the goal point on the level of the vehicle (controlled node), so the error
caused by the non-vertical controlled node is negligible.

Few proximity sensor and vehicle size fixes

Proximity sensor sits on the back of the combine now
fixed pathfinder vehicle data rectangles, clarified the

misconception that the direction node is always on the root node,

it is not, the direction node is the turning node, usually sits
between the non-steered wheels.

6.03.00022 Minor fixes
fix all hybrid A* pathfinder failing
fix reset fill level after making pocket

6.03.00021 Course generator and turn fixes
No extra headland circle (#6605)
Fixed the calculation of the headland/middle transition.
If the center mode is lands, there is still a small chance that

an almost full circle connecting track will be added if the starting
point is very close to the start/end of the first working row of the
lands pattern.

Partial fix for #6383
do not add straight section to turn end to align if there is no towed
implement
if turn on field enabled but there’s no space to turn (must reverse), use
the legacy wide turn (which is also buggy a bit).
if you don’t want your sprayers boom hit obstacles outside the field,
use a headland.

6.03.00020 Mode 2/3 improvements
Wait before starting the next row if the rendezvous point is close to the row end.
use A* to calculate distance to combine before the
rendezvous.
combine notifies unloader on missed rendezvous, unloader
re-plans route
try to approach combine waiting after backing out of the fruit
from the rear so we won’t cut in front of it.
don’t slow down around rendezvous when discharging already
don’t ask for a rendezvous when the combine is not willing to,

for example when unload is disabled on the first headland.
won’t initiate new rendezvous until the combine cancels the current one
move up rendezvous points close to row end
pipe in fruit map changed to have a 20 m buffer at each end of the
row to account for non-perpendicular headlands.
fixed offsets when calculating target to combine, sometimes it
used the side offset as front offset.
make sure to reset 95% full limit after making pocket
added safety margin to the calculation of the distance until full
All this to avoid the situation where the combine stops before reaching
the rendezvous point because it thinks it is full (although only 95%)
only considers unloaders actually waiting for assignment,
ignore the ones on unload course for example when a combine
is looking for an unloader
if an unloader is already assigned to a combine, only it is
waiting for the combine to become ready for unload (for example
due to fruit in pipe), assign the same combine to it. This
should probably be refactored, adding a new state for the unloader,
like WAITING_FOR_COMBINE_TO_BECOME_READY or so.

pvaiko

This is my edit off the 1455 international. The offical author is Tubbemodding.
– 125-175 hp
– 52000
– tire configurations
i reccomend to use the michilin big tires.

edit by FarmingTamo offical author Tubemodding