GOLDHOFER 2 AXLE LOW LOADER V1.0.0.0

A modern wooden cowshed. It is ideal for dairy farming and therefore also has an integrated milking robot.

Version 1.2.0.0:

– New: New North German textures

– Deco quantity and texture size reduced to save polygons

Version 1.1.0.0:

– Changed: New textures in the cow area

– Changed: Few changes in the stable area

Version 1.0.0.0: – First release

It is built in two parts, which means that in addition to the barn area, it also has a storage area for machines or bales. The two areas are separated by a high-speed network.

– Purchase price: 91.000€

– Maintenance costs: 50€/day

– Milk trigger in the hall next to the milking chamber

– Water outside on the pipe.

– Slurry and manure can be found outside.

– Feed in the trough

– Either sprinkle straw over the trough with a suitable device, or alternatively place a bale in the straw blower.

– All gates are animated.

– Lighting inside and floodlights on the outside can be switched on.

– The net can be driven up and down.

– Seasons ready

– Manure System ready

Required Mods:

– Manure System (By: Wopster)

farmerfivetom

Jatobá Farm is a brazilian map based on the region of the municipality of Jataí, Goiás.
– 29 large and medium sized fields with missions, with relatively rugged relief.
– Dealership with workshop and ramp for services.
– Accompanying a small town, where it is possible to buy some houses. Next door is the animal dealer.
– Gas station next to the JTY warehouse, with a workshop.
– Grains can be sold at the JTY and Pioneer warehouse, as well as potatoes and beets.
– The mill is the only outlet for sugarcane.
– The Abeia market in town accepts potatoes, beets and eggs.
– To sell cotton bales, wool, grass, silage and straw, you have to go to the Rio Claro Bales.
– Milk is sold only at the dairy.
– You can sell logs and wood chips at the sawmill.
– BGA for silage work.
– To buy limestone, you need to take a trailer to the unloading point at the limestone seller.
– On the main farm, your machines can be stored in two sheds, with a workshop for services.
– The main farm also has a house, pens for chickens, pigs and sheep, as well as a water collection point.
– Besides the farm, the map has a plot of land only with a field and shed for customization.
Have fun!

DH Modding

Rear lights with the following functions:
Dimensional light.
Stop signal.
Turn signal.
Reverse light.
License plate illumination.
And also, a side marker light.

Serega_56

Headland management for tractors, field sprayers, mowers and harvesters.

With headland management, functions of vehicles can be combined and activated together at the touch of a button to simplify turning manoeuvres when working in the field. All functions can be activated and deactivated individually for each vehicle via a GUI to achieve ideal adaptation to the work being carried out.

The headland management system must be added once to the respective vehicle in the shop or in the workshop as a configuration before it can be used. The cost for this is 3000,-.
It can be activated and deactivated in the vehicle with Shift-X. Alternatively, different buttons for activation and deactivation can be configured. The GUI is called up by default with Shift+Ctrl+X.

Included functions:
– Reduce speed (cruise control) and raise again.
– Raise lowered implements and lower them again
– Turn plough, single-stage or two-stage (via centre position)
– Raise and change ridge markers
– Disengage and re-engage power take-off(s) and hydraulics
– Beep when headland management is activated

Additionally, if VCA Mod (FS19_VehicleControlAddon) is present:
– Deactivate and reactivate GPS track guidance
– Disengage and re-engage active differential locks

Additionally, if Guidance Steering Mod (FS19_guidanceSteering) is available:
– Deactivate and reactivate GPS guidance

Additionally for existing SpeedControl Mod (FS19_zzzSpeedControl):
– Speed adjustment also possible by changing the cruise control level

Ideas for subsequent versions:
– Sequence of work steps adjustable
– Selectable time interval between individual work steps

Further ideas or wishes are welcome at https://github.com/jason0611/FS19_HeadlandManagement

Jason06 / Glowins Modschmiede

FS Miner’s Creations!
This time I will share with you my new Skid Steer Mower!

Feel free to share at your sites but keep the original link 😉

If you like get it if you don’t who cares.

Visit My Youtube Channel: https://www.youtube.com/c/FSMiner
Support my work: paypal.me/NGeorgios

FS Miner