SILO FACILITY V1.4.0.0

Moin moin love community,

Version 1.0.0.9
Rear chassis renewed
Adjusted the weight of the vehicle
New engine sound V8 with gear
Dedi bug fixed

Rail trailer revised.
Weight handling adjusted
Container fixation changed, now runs on the normal fixation and now suitable containers can be used very easily, so I removed the containers and you now need at least the standard itrunner pack

Today I present you the Scania HKL with all the trimmings.
The trailer is as appropriate in the LS17.
The ITR containers that fit on the trailer have been included and there are no complications with the ITR Pack.
The control for the Scania:
K = retract hook
M = extend hook (while the container is being loaded onto the trailer, you can extend the hook so that the truck does not lift off)
J = lower body
N = lift body
This control ONLY serves to get to the container ran without lifting the rear.
If you have the container coupled you can leave everything to the automatic and press X as usual.

The controller for the trailer:
Hold left Shift!
K = Pull Container Attacher to the front
Pull M = Container Attacher to the rear
If the container is coupled, decouple, move attacher so that he is out of range and only then you can decouple the trailer.
You can position yourself with the container exactly where you would like it.
Motor Config consists of the R730 and the chip tuning.
Tire Config consists of a steering axle and without. both Lizard Road and that stays that way!
You can buy bullfighters
Tires and truck Farbwahlt is of course also there.

Modell:Ap0lLo
Textur: Dimanix LS15
Script: Ap0lLo
Idee / Konzept: Ap0lLo
Tester: Ap0lLo

Good Morning,

Version 1.0.0.3
Rear chassis renewed
Revised weight and driving behavior
Engine V8 sound with gear

my Scania Semi was already quite good, now I have a 3 axle version for you.
The truck is on the current update, like the other Scania’s
Log is clean
Have fun with it
your Ap0lLo

Modell: Ap0lLo
Textur: Dimanix
Script: Ap0lLo
Idee / Konzept: Ap0lLo
Tester: Ap0lLo

Version 1.0.0.6
Rear chassis renewed
Revised weight and driving behavior
V8 engine sound with gear

Color choice for trucks and rims
Bullfänger buyable
2 Motor Configs, so that the good pulls everything, what he should and where he should
download only with original DL link
Have fun with the Scania

Modell: Dinamix, Ap0lLo
Textur: Ap0lLo
Script: Ap0lLo
Idee / Konzept: Ap0lLo
Tester: Ap0lLo

Finally, I finished something else !!!!!and it’s less shitty than most of my other stuff, would you look at that ! Ok, jokes asside, that’s a really high poly model I’ve had for forever, I managed to cut down 1.5 milion tris on it without destroying the model, that’s the most I could remove with my skill in blender, but to ruin it all, I put like 30 wheel option so the wheel i3d is now twice the size as the main i3d is, I’m stupid like that haha. Anyway, I made a new intercooler, new led tail light, it has dynamic wheel adjustment, is strappable, has window tint option, roll cage color option, interior color option, tail light panel color option, wheel color, main color, I made it quite easy to drive, it’s not a rocket but it’s still going at 250 km/h, there’s other bits of detail on it for you to find, have fun!

SebCroteau

I hereby officially offer our Schlueter Super 1900 for download.

All approvals are available, we wish you a lot of fun …

– 4 tire config

– With EHR and digital, or without

– Two fender configs

– high speed or normal

– full simple Ic

– fully animated engine

– original colors

Schlüterfan_77
pics_by_DeutzOS
pics_by_dennis