2020 Mercedes Actros MP5 v 1.0

Used to transport from chopped silage mixed feed wheat barley maize rape potatoes beet chips
Game: Farming simulator 22

UdruzenjeNezavisnihModera, MrCiro

Fendtpack by RepiGaming

Update 1.5.1.0:
Old chassis adjustments by 1976Silvio from v1.4 reinserted

The following also applies: “Not compatible with “REA CoG”. All other “REA modules” should run with the pack!
Since the vehicles have their own physics, as do the attachers, you don’t necessarily need the “RealThreePointAttacher” mod.
The mod “RealThreePointAttacher” is optional for the pack!

This pack contains various selected Fendt vehicles and tools. All vehicles have the IFKOS system installed, as well as various configs and simpleIC. To be able to enjoy the full range of displays, optional mods are required. It can also be played without these mods if desired.
Two warnings are displayed on the server regarding the XML size of the 700 & 900 Vario. Giants sets a limited size here because of console players.
The pack can be used on the server without restrictions.

Q: The pack with Interactive Control?
A: No, I won’t convert

Thanks to Ifko for using his scripts!

Included in the pack:
Vehicles
Favorite 800/900
Engine power: Turboshift: 816-824 + 824 chip
Vario: 916-926 + 926 chip
Tire configs + VarioGrip config
Color configs via AddConfig
RUL Config
GPS config
Isaria config (crop sensor)
IFKOS system
simpleIC (optional)

Vario 800 S4
Engine power: 822-828
Tire configs
Color configs via AddConfig
RUL Config
Isaria config (crop sensor)
IFKOS system
simpleIC (optional)

Vario 700
Engine power: 714-724
Tire configs + VarioGrip config
Color configs via AddConfig
Front loader config (Quicke, Hauer)
Front parts config for front loaders
Normal or Chrome config
Designline configs (Power, Power+, Profi, Profi+)
Seat config (Fendt ONE, Old GEN Version, Fendt ONE + Old GEN Version)
RUL Config
Front window config
Isaria config (crop sensor)
IFKOS system
simpleIC (optional)

Vario 900
Engine power: 930-942
Tire configs + VarioGrip config
Color configs via AddConfig
Normal or Chrome config
Designline configs (Power, Power+, Profi, Profi+)
Seat config (Fendt ONE, Old GEN Version, Fendt ONE + Old GEN Version)
RUL Config
Isaria config (crop sensor)
IFKOS system
simpleIC (optional)

Fendt IDEAL (only the caterpillar version)
Engine power: IDEAL 7T IDEAL 10T
Tire configs
Standard configs from the base game
Normal or chrome light config
RUL Config
Color configs via AddConfig
IFKOS system
simpleIC (optional)

Fendt Katana
Engine power: 650-850
Tire configs
Standard configs from the base game
Color configs via AddConfig
RUL Config
IFKOS system
simpleIC (optional)

Fendt Cargo T
Engine power: 1033 with 136 hp
Tire configs
Multi-display for telescopic arm
Color configs via AddConfig
RUL Config
simpleIC (optional)
Fendt Tigo XR 75 D (LS19 convert)
Tire configs
Loading volume: 42 m³
Color configs via AddConfig

Tools
Diamond 12 (color configs via AddConfig)
DynaFlex 9255 40F (color configs via AddConfig)
Squarda 1290 (color configs via AddConfig, RUL Config)
N60-40 (color configs via AddConfig, RUL Config)
N3003 (color configs via AddConfig)
375 Plus (color configs via AddConfig)
390 Plus (color configs via AddConfig)
Fendt F-880 rake (re-skinned Z2840, color configs via AddConfig)

RepiGaming

Z-302 Orkan 2 is a tractor forage harvester designed for harvesting grass or maize into chaff or, after appropriate adaptation, as a mulcher or potato stouter.

Working width: 1.25m
Required power: 35kM
Price: 2900€
Working speed: 10 km/h

Configurations:
Colour overall
Power take-off cover colour
Colour of decals
Hub colour
Wheel colour

Working mode
Decals
Work cover
Pipe adjustment
Power take-off cover
Tire pressure stickers
Rear hitch
Wheel mounts
Reflectors
Clutch covers
Drawbar
Wheel brand
Type of rims and tyres

Zimov

Autoloading specialisation for flatbed trailers. This automatically modifies the actual base game trailers, and will be applied to any new or existing trailers on your farm. Please see the included read-me file for instructions on adding to your own mod trailers or pallets.

Features:
– Loads any compatible pallet/container types (see list below)
– Loads lumber to any supported forestry vehicles
– Installed automatically on any compatible trailers (see list below)
– Load and Unload by selected material or container type
– Can also restrict loading to full pallets only
– Select ‘ALL’ to load mixed types in sequence
– Mixed pallets are loaded in size order for best packing efficiency
– Can interact with trailers when player is on foot (even when not attached to a vehicle)

Special Features for ‘KRONE Trailer Profi Liner’
– Load/Unload only available on the side that curtain is open
– Rear loading directly from forklift
– Rear door and curtain can be opened and closed by player on foot

Configured for the following container types:
– BigBags
– BigBag Pallets
– Euro Pallets
– IBC Liquid Tanks
– Square Bales
– Potato Boxes (requires mod: Seed Potato Pack)

Configured for the following trailers:
– Brantner DD 24073/2 XXL (bale trailer)
– Bremer Transportwagen TP 500 S
– BÖCKMANN MH-AL 4320/35
– BÖCKMANN KK 3018/27 H
– Demco Steel Drop Deck
– Farmtech DPW 1800 (standard)
– Fliegl DTS 5.9
– KRONE Trailer Profi Liner
– Kröger PWO 24
– LODE KING Renown Drop Deck
– Welger DK 115 (bale trailer)
– Salek ANS-1900 (bale trailer)

Configured for the following vehicles:
– Lizard Pickup 1986
– Lizard Pickup 2017
– Mahindra Retriever
– JohnDeer XUV865M
– Kubota RTV-XG850
– Kubota RTV-X1140
– Antonio Carraro Tigrecar 3200
– Train (vehicle carriage)

Configured for the following Platinum DLC vehicles:
– Train (planks, flatBed & timber carriages)
– Volvo SM 462
– Pfanzelt P13 4272
– Schwarzmüller Timber Trailer
– Schwarzmüller Timber Trailer Semi
– Schwarzmüller Low Loader 4A
– Schwarzmüller Low Loader 3A

Changelog:
v1.5.1.0
– Added support for pallets in the “Straw Harvest Pack”
v1.5.0.0
– Added items and vehicles from Premium Expansion
– Fixed memory leak caused by graphical debug display
– Added a new global option `disableManualLoading` (default is false)
v1.4.1.0
– Added vehicle settings for HayAndForagePack DLC
– Improved loading and unloading of round bales
– Improved frame rate when operating vehicles on foot
v1.4.0.0
– Added support for compatibility with AutoDrive
– High menu priority mode is now used by default
– Improvements to the log loading algorithm
– Improvements to round bale stacking
– Added a minimum length option for loading logs
– Automatically add custom object types for any automatically defined objects
– Added a parameter to define an alternative root node for an offset
– Fixed a bug where loading round bales would affect the next vehicle to be loaded (appearing as full)
– No longer charges for manually loaded items or loading from console commands
v1.3.1.0
– Added better support for extendable vehicles
– Included config for Pfanzelt P13 4272
– Added “High Priority” flag for F1 menu
– Fix for issue where trailers were still considered as full after selling contents
v1.3.0.0
– Configured to support Platinum DLC
– Able to load lumber onto supported forestry vehicles
– Support for the new shipping containers
– Correctly handles the extendable “Schwarzmüller Low Loader 3A”
– Support for “Pumps and Hoses” DLC
– Support for bale collection mode in CoursePlay
v1.2.1.0
– Hotfix for a LUA error that would sometimes occur for vehicles with multiple loading zones
v1.2.0.0
– Added a bale collection mode
– Added an option for rear loading/unloading only
– Added support for autoloading pallets onto the train (vehicle carriage only)
– Added an icon in the shop configuration page to show when autoload is active
– Added global option “manualLoadingOnly” for a less cheaty “autoload light” option
– Added global option to charge per pallet loaded, e.g.: pricePerPallet=”10″
– Added disableAutoStrap option (global or per vehicle)
– Added no loading if covered/uncovered options (for trailers with covers)
– Added multiple loading zones (step decks can now load to both areas)
– Added loading of objects by hand (small objects or super-strength)
– Added new console commands (see readme file for more details)
– Implemented function to correctly remove event listeners (credit to GtX)
v1.1.0.0
– Added different stacking heights for bales and pallets
– Pallets stack to different heights based on mass (to improve weight distribution)
– Improved manual loading and unloading with a forklift
– Manual side loading added to KRONE and low loader trailers
– Added Box Trailer vehicle type
v1.0.2.0
– Updated to work with 1.4.1.0

loki_79

Welcome to Back Roads County 4x.
A fictional 4x USA/Canadian inspired map placed out in the back roads farming industry. There you will find 1 prebuilt farm surrounded with farm land and forestry.

– 1 Prebuilt Farm
– Lime Buy Point
– Woodland for Forestry
– Sawmill
– 81 Fields
– Precision Farming ready
– Stone quarry
– 2 Train Silos

FSG Modding – FSG TAZ_MAN