Robin DR400 Flugsportverein Bad Tölz D-ELBT v1.1

This is a Real Life repaint. but sadly, the creator of the aircraft uses the same texture for the main door and tail section. This causes the texture on the other side of the tail and also of the door to be mirrored and you can’t do a thing about it. That is why the logo “FlensAir” is missing on the fuselage. But because the aircraft is sometimes flying without “FlensAir”, I also left it out.

benimix1701

London Elstree Aerodrome, UK – hand-crafted airport

Another airport re-crafted from scratch to match the real-world features as closely as possible. It mostly uses stock objects but it includes custom taxiway paint markings and custom model for rugby posts on 26 approach (crazy close to the glideslope!)
Enjoy It!
Info:

London Elstree Aerodrome (ICAO: EGTR) is an operational general aviation aerodrome located in Elstree, and is situated 2.6 nautical miles (4.8 km; 3.0 mi) east of Watford, Hertfordshire, England.

Elstree Aerodrome has a CAA Ordinary Licence (Number P486) that allows flights for the public transport of passengers or for flying instruction as authorised by the licensee (Aldenham Aviation LLP).

The aerodrome has one runway aligned roughly east–west. The runway (08/26) is 2,136 feet in length.

Includes:
Completely overhauled airport from scratch
Runways and taxiways base on airport charts.
Custom runway and taxiway paint markings
Taxiway signs
LITAS (PAPI – accurate 4.5 degree slope)
Custom model for rugby posts on 26 approach
Over 200 other hand placed stock scenery objects (inc. hangars)
Added ground ATC
Night lighting

Install:
Extract the “gobby-elstree” folder to your /Community/ folder.

Notes:
· The PAPI (LITAS) lights for 26 approach are not exactly as EGTR. It has a 3-3 formation of lights in real-life, but a 2-2 formation is the closest available.
· I’ve noticed a slight drop in frames due to lots of general aviation planes. I included over 50 parking spaces to accurately reflect how busy this airfield is.

GPS Coordinates: 51.655769, -0.326299

Gobby

Here are 6 Propeller Mods for the FS2020 Premium Deluxe Edition:

Prop_MOD_c152-aerobat
Prop_MOD_c172sp-classic
Prop_MOD_da40-tdi
Prop_MOD_pipistrel
Prop_MOD_savage-shockultra
Prop_MOD_sr22

– To Install: unzip, copy and paste any Prop_MOD folder to the FS2020 Community Folder.
– To Uninstall: delete Prop_MOD folder from the FS2020 Community Folder.

DISCLAIMER: Use at your own risk!
The use of the downloaded modded texture files is done at your own discretion and risk and with agreement that you will be solely responsible for any damage to your computer system or loss of data that results from such activities.
This Mod can be used by anybody as they see fit without any restrictions.

OSM

This is my first creator upload here! Just a small flight plan pack I made to reach all the STAR airports in Japan, complete with departures and arrivals. You can choose any plane to fly each leg with, but I recommend an A320 for the first one.

Really hope you enjoy it!

Siv5122

Enjoy flying over the beautiful southern part of Sweden. Thank you to the user “f99mlu” for providing a custom tool, and instruction, editing and much more, as well as “Vpilot” for providing help and testing.

This is my very first MSFS Bush Trip and could not have been accomplished without the help of the people mentioned in the brief overview. It’s a very simple bush trip with only one Point Of Interest, or POI, between each destination. This is meant to be flown slow and low and enjoy the Alaska landscape. I will say there are parts of areas or airports that need attention where usually water seems “off”, or the landscape needs work. Hopefully these will be addressed in the upcoming USA update in late November of 2020. Most legs are actually rather short as I wanted users to be able to fly a leg without getting too bored. Of course each leg is also automatically saved also, as it can be completed over time. Have fun and enjoy the Alaskan Bush Trip.

in2tech