WLADYMIREC T30-A80 V1.0.0.0

Re-textured Zetor 7340 to John Deere 7340, my first over-textured, so some bugs are likely to be found.
Kottna helped on the mode, which fixed a mistake with wheels.

ex!t.

With this mod you build a TOWER

i made this mod for fun please

You got to play step by step

ONE put 5 Pallets of PvcPipe 80000

TWO put 5 Pallets of ConcretePipe 80000

THREE put 160000 of Concrete

FOUR put 10 Pallets of CONCRETE BEAM = 160000

FIVE put 10 Pallets of STEEL BEAM 160000

SIX put 10 Pallets of CONCRETE SLAB = 160000

SEVEN put 160000 of Cement

GIANTS GC TheSnake and the others for the objects in the Mod

Fortuna Ftm 200 7.5 with the Germany design
we know that it is badly done but we have lost our desire for the time and still wanted to put it to the dl
Germany decals: agro.geiiiiga
Enmerget: botch_bei_deutz631
have fun with the mod
lg pixel modding

Pixelmodding

Moin moin love community,

Version 1.0.0.9
Rail trailer:
Weight reduced
More stability from the dolly and the drawbar
Slipping of the dolly reduced to a minimum. (as soon as the container was secured, it began to slide while standing)

Today I present you the Scania HKL with all the trimmings.
The trailer is as appropriate in the LS17.
The ITR containers that fit on the trailer have been included and there are no complications with the ITR Pack.

The control for the Scania:
K = retract hook
M = extend hook (while the container is being loaded onto the trailer, you can extend the hook so that the truck does not lift off)
J = lower body
N = lift body
This control ONLY serves to get to the container ran without lifting the rear.
If you have the container coupled you can leave everything to the automatic and press X as usual.

The controller for the trailer:
Hold left Shift!
K = Pull Container Attacher to the fron
Pull M = Container Attacher to the rear
If the container is coupled, decouple, move attacher so that he is out of range and only then you can decouple the trailer.
You can position yourself with the container exactly where you would like it.
Motor Config consists of the R730 and the chip tuning.
Tire Config consists of a steering axle and without. both Lizard Road and that stays that way!
You can buy bullfighters
Tires and truck Farbwahlt is of course also there.

Modell:Ap0lLo
Textur: Dimanix LS15
Script: Ap0lLo
Idee / Konzept: Ap0lLo
Tester: Ap0lLo

Change Log v1.0.0.1:
Corrected 5th axle group not recentering when fold/unfold is pressed
This trailer can haul up to 110 short tons (220,000 lbs, 99,790kg)
Usable deck length is 28’, but can be extended up to an additional 28’. It weighs 114,100 lbs (51,755 kg)

Features:
Jeep:
Independent color selection for inner and out frame
Configurable position for bridge attachment point.
All hoses modeled either through dynamic hoses or 3d model

Front Bridge:
Independent color selection for inner and outer frame
Manually steerable wheel group (considered 2nd group)
Auto recenter by pressing fold/unfold key/button
All hoses modeled either through dynamic hoses or 3d model

Front Gooseneck:
Independent color selection for inner and outer frame
Hydraulic tower movable by right mouse axis up/down
Configurable flood lights (forward facing, rear facing, or both)
All hoses modeled either through dynamic hoses or 3d model

Main Trailer:
Independent color selection for inner and outer frame
Hydraulic tower movable by right mouse button up/down
Configurable flood lights (forward facing, rear facing, or both)
Auto steer axle groups 3 and 5
Manual steering of axle groups 3 and 5
Auto steering recenter using fold/unfold key/button
All hoses modeled either through dynamic hoses or 3d model
Configurable deck extensions (7 ft, 14 ft, 21 ft, and 28 ft)
Configurable outriggers for all deck lengths

Transport Mode (works best with deck extensions):
1. remove gooseneck from main trailer
2. Drive jeep and bridge onto main trailer
3. Disconnect from Jeep
4. Go to main trailers steering platform and enter trailer
5. use middle mouse button (AXIS_FRONTLOADER_TOOL5) to flip king pin below deck front and to lower collision which will allow you to attach a truck underneath.
6. Attach main trailer to truck
7. raise collision
Do steps in reverse to make trailer ready for loads.

Jeremy Brown and Jordy Johnson